DRL timer switch time relay 1 to 480 sec kit 12V / 20A delay on car daylights

Time relay with accuracy from 1 to 480 seconds.
Manufacturer: Deselectra
Ship to
Shipping Method
Estimated Delivery
No shipping options

Item Description:

Time relay with accuracy from 1 to 480 seconds.


- length -  40 mm

- width - 27 mm

- height - 21 mm

Wired with 10 cm wires:

Power:  + Red,  - Black . Have protection against reverse supply voltage.

Normally open contact - TWO white wires

Power supply - 12V DC


Normally open contact - NO - 20A/12V - wired with two white wires

Normally closed contact - NC -10A/12V - not soldered 


- Red wire - to contact switch 12V+

- Black wire - to ground -12V-

- Two white wires - in parallel wiring to front lights switch  


Time is adjusted by a trimmer. 


Principle of work:

When power is on, the delay time start, led diode lights. When set time end, the relay is activated and output  NO contact is closed, NC contact is open,  until cut off the power.

By restarting power supply - cycle repeats.

It can be used for example for delay on of car lights. When ignition is start - the timer will wait (1-150s) and then will start the front lights, to save the car battery.  When ignition is off - the lights will cut off immediately. The timer need to receive 12V  from contact key and output to be wired to front lights switch.


 Package contents:

1. SMD Time Relay

2. Instruction for use and wiring diagram.